On Wednesday,
CIMTEC hosted a symposium focused around the efficient and economical way for migration
of PLC’s. Over thirty engineers were in attendance, all focused on enhancing
their technological capabilities. With the help of CIMTEC, and several valuable
team members, we have informed these engineers of the economical, efficient,
and safe way to migrate from older obsolete systems to the state of the art
technology provided by GE. The goal of the symposium was to help these
businessmen who need to migrate their current PLC structure, and offer viable and
sustainable options on how to transition from technology of old to the state of
the art platform that is offered by CIMTEC and General Electric. CIMTEC and
General Electric offer complete backward compatibility, which gives businessmen
a safety net when making the transition to new technology. In addition, the migration
path from a legacy GE PLC to their state-of-the-art Rx3i PAC system is
straight-forward, providing the shortest path to full migration and the most
economical path. The advantage of CIMTEC
became very clear to the businessmen, CIMTEC holds the unique ability of
selling, maintaining, and up-keeping the PLC control system for its clients.
Most of the businessmen were thrilled to hear of the success CIMTEC has had for
similar businesses. We want to thank everyone for coming out today! The event
was a huge success!
Cimtec Automation Blog
PAC-OPR Products + VisionView PC
The PAC-OPR products are industrial NEMA 12 panel-mount flat panel computers with 2 PCI slots. This product is available in three different panel sizes: 15” 1024x768, 17” 1280x1024, and 19” 1280x1024. In addition to the display choice, this system includes: a Resistive touchscreen, 1.83GHz (667 MHz FSB) T5600 C2D Processor with 2GB of DDR-2 RAM, Windows XP Pro installed (no CD media included). A 250GB (or greater) Hard Drive, 5-in-1 card reader, and DVD-ROM are also included as standard. Monitor and control the vision application with the VisionView interface.
VAMP-WN Products + VisionView VGA
The VAMP-WN is a highly configurable industrial flat panel display with a wide variety of packaging options. The stocked configurations are 15” 1024x768, 17” 1280x1024, and 19” 1280x1024 panels with a NEMA4 panel-mount front bezel and resistive touchscreen. Monitor and control the vision application with the VisionView interface via VGA and serial connections using the provided cables. This provides the flexibility to connect smaller- or larger-size monitors for “control room” viewing of images, results, CustomViews, and EasyViews.
PAC-SSX + VisionView PC
The PAC-SSX is an industrial flat panel computer in a rugged, fully-sealed IP65 stainless steel chassis. This system includes: a 15" 1024x768 TFT, resistive touchscreen, fanless 1.86GHz ATOM D2550 Processor with 2GB of DDR RAM, 32G solid state flash drive, and Windows XP Pro installed. There are no moving parts in this system which results in a very robust, long lasting product! Monitor and control the vision application with the VisionView interface.
For more information on Flat Panel Display Systems, head over to www.cdynamics.com. Computer Dynamics offers a wide variety of flat panel display solutions and can provide units ready to ship from our inventory as well as custom display solutions for any application need.
With the recent launch of the new Computer Dynamics website, we have added a blog which already has several articles of interest for people using, or planning to use PCs for monitoring and control in an Industrial environment. For example, we have already posted articles about using Windows XP (which will soon go end of life) in the Industrial space, as well as articles on processor performance to help you understand how to choose the right processor for your application. There is also an article on different touchscreen and display technologies which serves as a primer for the several viable technologies available today and describes why you might choose one technology over another for a given environment. For an example article on display and touchscreen technologies, head over to http://blog.cdynamics.com/2013/08/flat-panel-and-touchscreen-technologies_15.html. From there you will find all of the articles referenced above as well as additional content as we add more topics regularly. If you haven't already, head on over to http://www.cdynamics.com as well to view the products in the Computer Dynamics line.
Friday, May 15, 2015
Thursday, April 24, 2014
5 Advantages of Hiring an Automation Consultant
An automation consultant is a specialist who can provide sound information and guidance to businesses seeking new, replaced or upgraded automation equipment. By offering a wide variety of automation products and solutions, CIMTEC's consultants are a valuable resource for businesses. Hiring an automation consultant provides these key benefits:
- Custom solutions - Often, it will take more than one solution to meet your business' automation needs. By meeting with a consultant, you receive a custom solution tailored to your company.
- Knowledgeable - CIMTEC's automation consultants are well-trained and knowledgeable about the latest products, trends and regulations affecting multiple industries.
- Save time - Missing the mark when it comes to planning and implementation of automation systems can result in lost time and money. Take the initiative to speak with a consultant about your needs before making a decision.
- Reduce risk - Without a thorough evaluation of your requirements, it's difficult to control risks. Meeting with an automation consultant helps minimize overall risk by providing expert guidance.
- Enhance productivity - With the proper automation products, your team's overall productivity is enhanced, leading to better performance. A combination of services, products and technology is used to develop a solution designed for your unique business.
Tuesday, February 11, 2014
New Factory-made GE 90-70 Parts (IC697) In Stock Today
As you probably have heard, CIMTEC Automation is now the sole source for brand new, factory-made GE IP 90-70 PLC parts. We purchased all of the parts that GE IP had left in stock and we currently have over 4,000 new 90-70 parts in stock, ready to ship TODAY!
Our inventory includes over 90 CPX version CPUs - IC697CPX772, IC697CPX782, IC697CPX928 and IC697CPX935 - plus HUNDREDS of IC697CPM790, IC697ALG230 and ALG320, IC697CMM742 and all the IC697PWR and IC697MDL units you could want.
All of these parts were produced by GE IP in their factory in Charlottesville, VA. And, most importantly, they are FACTORY NEW parts - with current factory warranty. There are people out there who say that their 90-70 parts are new - what they really mean is that they are still in the factory-sealed boxes. But a trained eye can tell that, in most cases, these items we sourced from someones overstock or leftover stores inventory,and while still new in the box, they are several years old and OUT OF WARRANTY. While the local provider may give you his warranty, it doesn't mean that you will get a New replacement part if it fails.
When you buy New 90-70 parts from CIMTEC Automation, you can be sure that 1) the parts are authentic Factory-made parts and that 2) we will support the factory warranty. What does that mean? We will either repair or replace your part, based on availability.
If we have to repair it, it is going to be repaired to factory standards because we are the ONLY Factory-Authorized repair house for GE IP 90-70 in the world! We have all of the documentation, Bills of material, and board descriptions for every 90-70 board built by GE. In addition, we have all of the test rigs that GE used on the production floor to test every 90-70 module.
So you can't go wrong with buying 90-70 from CIMTEC Automation:
Our inventory includes over 90 CPX version CPUs - IC697CPX772, IC697CPX782, IC697CPX928 and IC697CPX935 - plus HUNDREDS of IC697CPM790, IC697ALG230 and ALG320, IC697CMM742 and all the IC697PWR and IC697MDL units you could want.
All of these parts were produced by GE IP in their factory in Charlottesville, VA. And, most importantly, they are FACTORY NEW parts - with current factory warranty. There are people out there who say that their 90-70 parts are new - what they really mean is that they are still in the factory-sealed boxes. But a trained eye can tell that, in most cases, these items we sourced from someones overstock or leftover stores inventory,and while still new in the box, they are several years old and OUT OF WARRANTY. While the local provider may give you his warranty, it doesn't mean that you will get a New replacement part if it fails.
When you buy New 90-70 parts from CIMTEC Automation, you can be sure that 1) the parts are authentic Factory-made parts and that 2) we will support the factory warranty. What does that mean? We will either repair or replace your part, based on availability.
If we have to repair it, it is going to be repaired to factory standards because we are the ONLY Factory-Authorized repair house for GE IP 90-70 in the world! We have all of the documentation, Bills of material, and board descriptions for every 90-70 board built by GE. In addition, we have all of the test rigs that GE used on the production floor to test every 90-70 module.
So you can't go wrong with buying 90-70 from CIMTEC Automation:
- Factory-made parts with full warranty
- The only Factory Authorized 90-70 Repair Center in the world
Friday, February 7, 2014
CIMTEC at Greenville, SC Palmetto Engineering & Consulting 2014 Show
Cimtec Automation (Charlotte, NC) was proud to participate in Palmetto Engineering & Consulting’s (PEC) 5th annual showcase event held in Downtown Greenville on January 15th and 16th. While primarily of interest to the Telecom Industry, the PEC show also featured companies involved in Industrial Automation as well. Diverse Industries (Duncan, SC) did a presentation on the future of robotics in industrial automation as well as the consumer industry. They also hinted at what Amazon is trying to do with 30 minute deliveries via drones. Schneider Electric (Simpsonville, SC) presented information on Arc Flash Safety.
Cimtec showed off a variety of products covering their wide range of knowledge in vision, safety, sensing, and industrial systems. Featured products included:
• Cognex DataMan bar code scanning products, both fixed mount (DM302X) and handheld (DM8500)
• SICK Safety Products including FlexiSoft (Safety Controller) with an addition of FlexiLoop (Cascading Safety)
• GE-IP PAC and PLC systems, including RXi (Controller), RXi (IPC), Rx3i (PAC System), VersaMax (PLC) and RSTi (Slice IO)
• Hirschmann Switches, RS30 & OCTOPUS products
• Computer Dynamics PAC-PCAP10 Operator Interface with a multi-touch projected capacitive touchscreen
Cimtec not only distributes products from these and other manufacturers, we also provide engineering and integration services to tie various pieces of hardware together and provide software and service solutions on top of that.
Cimtec showed off a variety of products covering their wide range of knowledge in vision, safety, sensing, and industrial systems. Featured products included:
 |
| CIMTEC Booth at PEC 2014 |
• SICK Safety Products including FlexiSoft (Safety Controller) with an addition of FlexiLoop (Cascading Safety)
• GE-IP PAC and PLC systems, including RXi (Controller), RXi (IPC), Rx3i (PAC System), VersaMax (PLC) and RSTi (Slice IO)
• Hirschmann Switches, RS30 & OCTOPUS products
• Computer Dynamics PAC-PCAP10 Operator Interface with a multi-touch projected capacitive touchscreen
Cimtec not only distributes products from these and other manufacturers, we also provide engineering and integration services to tie various pieces of hardware together and provide software and service solutions on top of that.
Wednesday, October 16, 2013
CIMTEC Announces CDI Systems as an option for Cognex VisionView VGA andVision View PC
Computer Dynamics systems packaged with Cognex VisionView available from CIMTEC
CIMTEC Automation is now providing Computer Dynamics Industrial Flat Panel systems with Cognex VisionView software. VisionView is ideal for monitoring and controlling vision systems and industrial ID readers on the factory floor, and allows operator controls specific to the application. The VisionView application software offers the following features:- Automatic detection. VisionView will automatically detect any Cognex vision system on your network.
- Mix and match Cognex In-Sight systems. VisionView allows you to view up to twelve In-Sight vision systems in a tiled view.
- Graphical interface. VisionView displays full color images, with graphic overlays and operator controls.
- Fast image updates. VisionView provides the most recent inspection images so you can view your process in real-time.
- Access to CustomViews. The operator controls created in the spreadsheet automatically appear in VisionView.
- EasyView display. Items selected from In-Sight EasyBuilder interface software will appear on the VisionView screen, with impressive ease of use.
- Run-time ability to train fonts, without a PC. No downtime is required during changeovers. Ideal for OCR/OCV applications.
PAC-OPR Products + VisionView PC
The PAC-OPR products are industrial NEMA 12 panel-mount flat panel computers with 2 PCI slots. This product is available in three different panel sizes: 15” 1024x768, 17” 1280x1024, and 19” 1280x1024. In addition to the display choice, this system includes: a Resistive touchscreen, 1.83GHz (667 MHz FSB) T5600 C2D Processor with 2GB of DDR-2 RAM, Windows XP Pro installed (no CD media included). A 250GB (or greater) Hard Drive, 5-in-1 card reader, and DVD-ROM are also included as standard. Monitor and control the vision application with the VisionView interface.VAMP-WN Products + VisionView VGA
The VAMP-WN is a highly configurable industrial flat panel display with a wide variety of packaging options. The stocked configurations are 15” 1024x768, 17” 1280x1024, and 19” 1280x1024 panels with a NEMA4 panel-mount front bezel and resistive touchscreen. Monitor and control the vision application with the VisionView interface via VGA and serial connections using the provided cables. This provides the flexibility to connect smaller- or larger-size monitors for “control room” viewing of images, results, CustomViews, and EasyViews.PAC-SSX + VisionView PC
The PAC-SSX is an industrial flat panel computer in a rugged, fully-sealed IP65 stainless steel chassis. This system includes: a 15" 1024x768 TFT, resistive touchscreen, fanless 1.86GHz ATOM D2550 Processor with 2GB of DDR RAM, 32G solid state flash drive, and Windows XP Pro installed. There are no moving parts in this system which results in a very robust, long lasting product! Monitor and control the vision application with the VisionView interface.For more information on Flat Panel Display Systems, head over to www.cdynamics.com. Computer Dynamics offers a wide variety of flat panel display solutions and can provide units ready to ship from our inventory as well as custom display solutions for any application need.
Monday, September 16, 2013
Learn more about using Industrial PCs
With the recent launch of the new Computer Dynamics website, we have added a blog which already has several articles of interest for people using, or planning to use PCs for monitoring and control in an Industrial environment. For example, we have already posted articles about using Windows XP (which will soon go end of life) in the Industrial space, as well as articles on processor performance to help you understand how to choose the right processor for your application. There is also an article on different touchscreen and display technologies which serves as a primer for the several viable technologies available today and describes why you might choose one technology over another for a given environment. For an example article on display and touchscreen technologies, head over to http://blog.cdynamics.com/2013/08/flat-panel-and-touchscreen-technologies_15.html. From there you will find all of the articles referenced above as well as additional content as we add more topics regularly. If you haven't already, head on over to http://www.cdynamics.com as well to view the products in the Computer Dynamics line.
Monday, July 15, 2013
CIMTEC Automation Invites You to Attend PROFINET Training on Sept. 12th
CIMTEC Automation LLC is participating in the upcoming PROFINET training seminar being held in Raleigh North Carolina on September 12th 2013.
CIMTEC Automation sees this event as a unique opportunity for engineering and technical professionals to gain a thorough understanding of PROFINET. This event is sponsored by CIMTEC and other member organizations making this a free event for all registrants.
This event will cover:
Introduction
- Organization behind PROFINET
- System Architecture: PROFINET and other buses
PROFINET Fundamentals
- Industrial Ethernet Overview
PROFINET: How do I…
… connect IO & a legacy fieldbus?
… get data from sensors/actuators?
… integrate machines & do motion control?
… install my infrastructure & use wireless connections?
Wrap-up and Resources
Register Now,
Register Now,
CIMTEC Automation sees this event as a unique opportunity for engineering and technical professionals to gain a thorough understanding of PROFINET. This event is sponsored by CIMTEC and other member organizations making this a free event for all registrants.
This event will cover:Introduction
- Organization behind PROFINET
- System Architecture: PROFINET and other buses
PROFINET Fundamentals
- Industrial Ethernet Overview
PROFINET: How do I…
… connect IO & a legacy fieldbus?
… get data from sensors/actuators?
… integrate machines & do motion control?
… install my infrastructure & use wireless connections?
Wrap-up and Resources
Register Now,
Seating is Limited!
Event Details
Training Class DATE
September 12th 2013Training Class LOCATION
Raleigh, NC (Hilton North Raleigh)
Training Class TIME SCHEDULE
8:00am Registration and Light Breakfast
8:30am Class begins
10:00am Morning Break, coffee and other beverages
12:00noon Hosted Lunch
1:00pm Class resumes
3:15pm Afternoon Break, snacks and beverages
4:30pm Class ends
Register Now,
Seating is Limited!
Subscribe to:
Posts (Atom)